Price: ₹879 - ₹585.00
(as of Mar 14, 2025 06:25:22 UTC – Details)
ADWITS 9 Pack Thermal Conductive Silicone Pads with 6.0 W/mk Thermal ConductivityThese thermal conductive silicone pads are specially designed to transfer heat through the gap, effectively transferring the heat of the heat-generating component to the heat sink, and has thermal conduct electrical insulation properties, and the product is also has viscosity, and the application is safe and simple
Easy Installation 1. Remove the old heat-conducting material, clean the surface
2. Determine the contact position, select the best matching thickness and cut the appropriate size
3. Tear off the protective films on both sizes
4. Exert certain pressure to make it with good contacts with both surfaces
Package Content20X67X0.5mm X3
20X67X1.0mm X3
20X67X1.5mm X3
Excellent thermal conductivity: Made of thermal silica gel with heat conductivity of 6.0 W/Mk
Great safety and stability: electrical insulation, in -40 ℃ – 200 ℃ will not melt. Wear Resistant, anti static, fire retardant, buffering, no toxic, odorless, no corrosion, no stimulation, no damage to metal materials
Fits for Control board, motor, electronics, auto mechanics, computer host, laptop, DVD, VCD, LID, Set-top box, LED IC SMD DIP and any cooling modules
Packed with 9 thermal pads,three sizes, each with 3 pieces: 20x67x0.5mm, 20x67x1.0mm, 20x67x1.5mm
Easy to install, you can select most suitable thickness and cut the required sizes. Great replacement for traditional heat sink compound grease paste
Customers say
Customers find that the heat sink works well for them, providing good thermal performance and reducing temperature. They are satisfied with its functionality, quality, and ease of use. However, some customers have differing views on value for money, thickness, and adhesion.
AI-generated from the text of customer reviews
Amazon Customer –
good quality easy to use
good pad to block hot air, if u know how to use properly
shashank –
Product good and working thermal
Cooling thermal pads good work temperature mention laptops98℃ control heat scence and price higher pleasI am buy again pleas next time discount 🙂🙂🙂🙂🙂🙂🙂🙂
Mannat Sharma –
Excellent at this price.
I think these pads are very good for laptop vram, MOSFETs etc., they performed great, vram temperate never go above 75° under full load, and make sure u use correct thickness so that it will not affect heatsink contact with cpu, gpu dies; in my case it needed all 3 0.5mm (gpu vram, gpu resistors, chipset), 1.0mm (cpu resistors), 1.5mm(small chips on side of resistors of both cpu and gpu where company also had applied thermal pads by default so I did too). I used them with thermal grizzly kryonaut thermal paste on cpu gpu dies, this is literally best thermal servicing combo (kryonaut+adwits) under rs 1000, go for it!
Shivansh –
Does the job but hard to apply.
Its effective and does the job for its cost, but the application process was very tedious.The adhesive is near to non existant. You have to cut multiple pieces to the correct size before one of them turns out to be adhesive.And dont even ask me about the mess it makes while cutting. The amount of plastic I had to carefully collect was just very tedious.I wish there was some other thermal pad as cheap and effective as this but there isn’t any available near me.Its compatible if you have the skill and patience, but be ready to waste a lot of pads before finding the one with adhesive on it.The thermal performance is as expected. If possible try to increase budget and buy from Grizly or other valuable brands.
ADeKoB –
Am new to this cooling method, and are good in quality.
Well, i used ghem in my laptop and they were easy to setup.I think everyone should use them.Better to have something then nothing.Used them on ssd, ram and also applied on heat pipes of laptop just for fun.Didn’t felt cheap.Stickyness is still goood.Now the effect on heat!!I dont know. I didn’t check but i do believe they work really good as they were cool to touch while installing.
ARJUN A. –
Good for the Price
Much softer than I expected, i don’t think the conductivity is same as the claim but Will do the jobYou can use this pad for the laptops but i don’t recommend using this as a replacement for the Thermal putty. Go for Gelid instead
Rahul G. –
Best for gaming laptops
All thickness pads here, go for it. Perfect used case for repairing my laptop, used thermal grizzly kryonaut on the gpu and cpu and these pads on VRMs, gpu memory and cpu chipset; had extra left for both the ssds in my Zephyrus g15 2021.
Leo –
does decent job but very annoying to work with. Would not recommend
Okay so my honest review after trying to repaste my Alienware 17 with it. It does decent job but the adhesive is weak. Sometimes it would stick to my fingers and other times when I would try to flip heat sync onto the motherboard pads would fall off. I had super frustrating episode working with these. If you do decide to order them then Atleast order 2 packs because when they fall of and get dusty it will be even more frustrating to try to make them stick.Would not order them again.
Świetne mydło –
Bardzo dobre termopady, łatwe w cięciu i nakładaniu. Ja użyłem 1.5 do gpu. Polecam
Valentino –
Perfectas para el mantenimiento de los equipos informáticos. Cumplen su función perfectamente y no son caras.
Serap U. –
Meine waren im Laptop sehr abgenutzt. Mein Bruder hat mir die neuen eingesetzt. Passt perfekt.
Emre TEMTEK –
çok kaliteli ürün
Joaquim de Sousa –
10 degrés en moins. Donc, fait le job qu’on lui demande.